Tapping Sleeves

Tapping Sleeves

Tapping Sleeve shall be of the high strength type having a wide body, made of corrosion resistant 304 stainless steel, which conforms to and reinforces the pipe. The sleeve shall have a wide gasket of Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000 with hydromechanical activated lip, captured in a recessed groove around the outlet; 18-8 Type 304 stainless steel hardware and nuts. Stainless steel tapping sleeve shall be furnished with a stainless steel test plug in the test outlet. Sleeve shall be fully passivated to return the stainless steel to its highest corrosion resistance. Stainless steel mechanical joint outlet* shall meet the ANSI 21.11/AWWA C-111 Standards for Mechanical Joint Dimensions. Outlets 3” - 16” shall be of one unit “monocast” design without separate or affixed components. Outlet shall be furnished with load bearing alignment set pins to prevent movement of the tapping assembly before or during the tapping process. For outlet sizes 14" and larger, the gasket groove must be consistently positioned about throat of tapping waterway. Inside diameter of the gasket groove must be set back a minimum of 1" from the waterway to allow dispersal of forces generated by gasket compression. Gasket grooves machined in a circle and formed to an elliptical shape will not be an accepted equal. Nominal pipe sizes 36" and larger shall be of the heavy duty type. 


Product Compare (0)


10"  X 4" S.S. TAPPING SLEEVE FOR PVC/STEEL

10" X 4" S.S. TAPPING SLEEVE FOR PVC/STEEL

FeaturesBody, straps and UNC threaded studs are made of 18-8 Type 304 stainless steel Flange can be..

$821.64 Ex Tax: $775.13

10" X 8" S.S. TAPPING SLEEVE FOR DI/CI

10" X 8" S.S. TAPPING SLEEVE FOR DI/CI

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can be..

$1,149.23 Ex Tax: $1,084.18

12" X 12" S.S. TAPPING SLEEVE FOR A.C.PIPE

12" X 12" S.S. TAPPING SLEEVE FOR A.C.PIPE

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can ..

$1,904.18 Ex Tax: $1,796.40

12" X 4" S.S. TAPPING SLEEVE FOR DI/CI

12" X 4" S.S. TAPPING SLEEVE FOR DI/CI

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can be..

$906.73 Ex Tax: $855.41

12" X 6" S.S. TAPPING SLEEVE

12" X 6" S.S. TAPPING SLEEVE

FeaturesBody, straps and UNC threaded studs are made of 18-8 Type 304 stainless steelFlange can be e..

$1,069.51 Ex Tax: $1,008.97

12" X 6" S.S. TAPPING SLEEVE FOR A.C.PIPE

12" X 6" S.S. TAPPING SLEEVE FOR A.C.PIPE

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can be..

$925.24 Ex Tax: $872.87

12" X 8" S.S. TAPPING SLEEVE FOR A.C.PIPE

12" X 8" S.S. TAPPING SLEEVE FOR A.C.PIPE

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can be..

$1,267.12 Ex Tax: $1,195.40

12" X 8" S.S. TAPPING SLEEVE FOR DI/CI

12" X 8" S.S. TAPPING SLEEVE FOR DI/CI

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can be..

$1,267.12 Ex Tax: $1,195.40

16" X 4" S.S. TAPPING SLEEVE

16" X 4" S.S. TAPPING SLEEVE

FeaturesBody, straps and UNC threaded studs are made of 18-8 Type 304 stainless steel. Flange can be..

$1,571.94 Ex Tax: $1,482.96

16" X 6" S.S. TAPPING SLEEVE

16" X 6" S.S. TAPPING SLEEVE

FeaturesBody, straps and UNC threaded studs are made of 18-8 Type 304 stainless steel. Flange can be..

$1,703.14 Ex Tax: $1,606.74

16" X 6" S.S. TAPPING SLEEVE FOR DI/CI

16" X 6" S.S. TAPPING SLEEVE FOR DI/CI

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can be..

$1,148.99 Ex Tax: $1,083.95

16" X 6" S.S. TAPPING SLEEVE FOR STEEL

16" X 6" S.S. TAPPING SLEEVE FOR STEEL

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can be..

$1,131.47 Ex Tax: $1,067.42

16" X 6" S.S. TAPPING SLEEVE FOR STEEL

16" X 6" S.S. TAPPING SLEEVE FOR STEEL

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can be..

$1,131.47 Ex Tax: $1,067.42

16" X 8" S.S. TAPPING SLEEVE FOR A.C.PIPE

16" X 8" S.S. TAPPING SLEEVE FOR A.C.PIPE

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can be..

$1,460.27 Ex Tax: $1,377.61

20" X 8" S.S. TAPPING SLEEVE FOR DI/CI

20" X 8" S.S. TAPPING SLEEVE FOR DI/CI

FeaturesBody, straps and UNC threaded bolts are made of 18-8 type 304 stainless steel. Flange can be..

$1,556.76 Ex Tax: $1,468.64

Showing 1 to 15 of 24 (2 Pages)